1" Corrosion Resistant Galvanized Hexagonal Honeycomb Cage
Galvanized gabion mesh is a hexagonal honeycomb cage woven from metal mesh. The metal wire used in gabion gabion is processed with high galvanization to improve corrosion resistance. In some places where the water quality is not very good (such as the pH value is too low) and the engineering life and quality requirements are high, the galvanizing line can also be coated with a layer of specially optimized anti-corrosion polyvinyl chloride resin (PVC). ) . The finished structure of hot-dip galvanized gabion mesh has the characteristics of anti-rust, anti-static, anti-aging, corrosion resistance, high compression resistance, high shear resistance, etc. The hot-dip galvanized gabion mesh can effectively resist the erosion of salt water or high pollution. (Gabion cage) length, width and height are 4X2X 0.23M--aperture 6X8--wire diameter 2.2MM galvanized).
Galvanized gabion gabion is made of high corrosion-resistant, high-strength, ductile low-carbon steel wire or PVC-coated galvanized non-galvanized steel wire using hexagonal mechanical weaving, according to ASTM A 975 and EN10223 standards, all The diameter of the galvanized low carbon steel wire used varies according to the engineering design requirements. Generally between 1.5-4.0mm, the tensile strength of the steel wire is not less than 38kg/㎡, and the weight of the metal coating is generally higher than 245g/㎡. The edge wire diameter of the gabion mesh is generally larger than the wire diameter. The length of the twisted part of the double wire shall not be less than 5cm. In order to ensure that the metal coating and PVC coating of the steel wire at the twisting point are not damaged by its mechanical nature.
Application of galvanized gabion gabion product: the structure can be used for embankment slope support, foundation pit side support, mountain rock surface hanging net shotcrete, slope vegetation (greening), river side body erosion prevention, reservoir bottom and other applications It can also be made into cages and net pads for the anti-scour protection of rivers, dams and seawalls, as well as cages for reservoirs, river closures and their aquatic products. breeding, etc.
Hot-dip galvanized gabion mesh technology refers to weaving anti-corrosion, wear-resistant, high-strength, low-carbon, high-strength galvanized steel wire or aluminum-zinc alloy steel wire (or homogeneous plastic-coated steel wire) into a double-stranded, hexagonal mesh mesh. The engineering design requires an engineering technique of assembling a honeycomb cage and filling it with fillers such as block stones. This honeycomb structure best conforms to the principles of mechanics and is a huge block structure of the same nature.
Hot-dip galvanized gabion mesh has the function of bearing tension and can absorb unknown pressure. This technology can better realize the organic combination of engineering structure and ecological environment, and is the preferred structural form for protecting riverbeds, controlling landslides, preventing debris flow disasters, preventing rockfall and protecting the environment.
Common specifications and models:
| Galvanized hexagonal wire netting |
| mesh | Min. Gal.v.
G/SQ.M | Width | Wire Gauge (Diameter)
BWG |
| Inch | mm | Tolerance(mm) |
| 3/8" | 10mm | ±1.0 | 0.7mm - 145 | 2' - 1M | 27, 26, 25, 24, 23 |
| 1/2" | 13mm | ±1.5 | 0.7mm - 95 | 2' - 2M | 25, 24, 23, 22, 21 |
| 5/8" | 16mm | ±2.0 | 0.7mm - 70 | 2' - 2M | 27, 26, 25, 24, 23, 22 |
| 3/4" | 20mm | ±3.0 | 0.7mm - 55 | 2' - 2M | 25, 24, 23, 22, 21, 20, 19 |
| 1" | 25mm | ±3.0 | 0.9mm - 55 | 1' - 2M | 25, 24, 23, 22, 21, 20, 19, 18 |
| 1-1/4" | 31mm | ±4.0 | 0.9mm - 40 | 1' - 2M | 23, 22, 21, 20, 19, 18 |
| 1-1/2" | 40mm | ±5.0 | 1.0mm - 45 | 1' - 2M | 23, 22, 21, 20, 19, 18 |
| 2" | 50mm | ±6.0 | 1.2mm - 40 | 1' - 2M | 23, 22, 21, 20, 19, 18 |
| 2-1/2" | 65mm | ±7.0 | 1.0mm - 30 | 1' - 2M | 21, 20, 19, 18 |
| 3" | 75mm | ±8.0 | 1.4mm - 30 | 2' - 2M | 20, 19, 18, 17 |
| 4" | 100mm | ±8.0 | 1.6mm - 30 | 2' - 2M | 19, 18, 17, 16 |
Note:
1.) The above tolerance comply with standard EN10223-2:1997;
2.) Minimum Galvanization is only for typical wire diameter as stipulated separately in the column for your reference; Also it is only for hot dipped Galvanized Netting.
FAQ:
Q: Are you a trading company or manufacturer ?
A: We are factory. We are manufacturer of Wire Mesh .
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 10-15 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=100000USD, 100% in advance.
Payment>=100000USD, 30% T/T in advance ,balance against copy of B/L.
Product Tags:
|
|
1" Corrosion Resistant Hex Wire Mesh Galvanized Honeycomb Cage Images
|
